Skip to content

    CENTRIFUGES · OPTIKA

    Optika centrifuges for analytical laboratories and process control.

    Italian manufacture with proprietary motors, rotors and chassis under ISO 13485 and ISO 9001. Sixteen models ranging from benchtop at 6,500 rpm to floor-standing at 22,000 rpm, with refrigerated variants and aerosol-tight rotors for safe handling of hazardous samples.

    16

    models in the programme

    22 000

    max rpm (OT-S22R)

    52 000

    max × g

    5

    industry segment

    Optika OT-1848R microcentrifuge

    Category 01 · Microcentrifuges

    Bench-top microcentrifuges for 1.5/2.0 mL tubes and PCR strips.

    Fast spins and dedicated routine runs. Quarter-twist rotor lock on several models reduces wrist strain during high sample throughput. Refrigerated variants (M15R, 1848R) protect heat-sensitive samples.

    ModelMax rpmMax RCFCapacityCooling
    OT-mini 66 5002 234 × g6 × 1.5/2.0 mL + 2 PCR strips—
    OT-131213 50012 300 × g12 × 1.5/2.0 mL—
    OT-M15S15 00021 206 × g24 × 1.5/2.0 mL—
    OT-M15R15 00021 583 × g24 × 1.5/2.0 mL−10 → 40 °C
    OT-1848R18 00030 356 × g48 × 1.5/2.0 mL · swing-out 6 × 4−12 → 40 °C
    Optika OT-1696R II multipurpose centrifuge

    Category 02 · Multipurpose centrifuges

    Bench-top centrifuges with fixed-angle and swing-out rotors.

    One centrifuge, many matrices. Programme memory (10–100 programmes), pulse function and ACC/DEC ramping provide reproducible runs between operators. OT-1696R II has Snap-On bucket lock and runs 4 × 1,000 mL swing-out.

    ModelMax rpmMax RCF fixed-angleSwing-out capacityCooling
    OT-124812 00016 582 × g4 × 250 mL—
    OT-1248R12 00016 582 × g4 × 250 mL−10 → 40 °C
    OT-158015 00024 249 × g4 × 750 mL—
    OT-1580R15 00025 910 × g4 × 750 mL−20 → 40 °C
    OT-1696R II16 00027 991 × g4 × 1 000 mL−11 → 40 °C
    Optika OT-S22R high-speed floor centrifuge

    Category 03 · High-speed · Floor-standing

    High volume at high g-forces — floor-standing with refrigeration.

    When both volume and g-force are required. OT-S22R reaches 22,000 rpm and 52,000 × g; OT-S12R offers the same platform at a calmer 12,000 rpm for routine applications. Both are refrigerated and feature key-lock and a FAST cool button for rapid pre-cooling.

    ModelMax rpmMax RCFFixed-angle capacityCooling
    OT-S12R12 00022 265 × g6 × 1 000 mL−10 → 40 °C
    OT-S22R22 00052 001 × g4 × 1 000 mL−10 → 40 °C
    Optika OT-T05R low-speed centrifuge

    Category 04 · Low-speed centrifuges

    Gentle separation of vacuum tubes and 50 mL tubes.

    For daily sediment and phase separations where lower g-forces are sufficient. OT-T04 in standard configuration, OT-T04B with swing-out support, OT-T05R in refrigerated version for heat-sensitive matrices in sample preparation.

    ModelMax rpmMax RCFCapacityCooling
    OT-T044 0002 075 × g12 × vacuum tubes—
    OT-T04B4 0002 774 × g10 × 50 mL fixed-angle · 4 × 100 mL swing-out—
    OT-T05R5 0004 218 × g10 × 50 mL fixed-angle · 4 × 100 mL swing-out−10 → 40 °C
    Optika clinical centrifuge GZ-416

    Category 05 · Clinical · IVDR

    GZ-416 — IVDR-certified benchtop centrifuge for routine preparation.

    Manufactured to IVDR with motorised lid, rotor ID and lockable user interface. Large capacities for a benchtop unit: 16 × 15 mL or 10 × 50 mL fixed-angle and 4 × 100 mL swing-out. A good fit for clinical labs that also conduct research.

    ModelMax rpmMax RCFCapacityCertification
    GZ-4164 0002 826 × g (swing-out)16 × 15 mL or 10 × 50 mL · swing-out 4 × 100 mLIVDR
    Optika HyperCOOL HC3110P freeze dryer with chamber and flasks

    Category 06 · Freeze drying · HyperCOOL

    HyperCOOL freeze dryers for preserving and concentrating samples.

    Frozen samples are dried by sublimation under deep vacuum, preserving structure and quality. Two condenser temperatures: −55 °C for water-based samples and −110 °C for organic solvents with low freezing points. The Teflon-coated top plate and chamber withstand aggressive solvents, and the front-mounted condenser with a magnetic lid makes cleaning simple and cycles short.

    ModelCondenser temperatureCold trapIce capacityWeight
    HC3055P−55 °C4 L · Ø 165 × H 202 mm3 kg · 2,5 kg/24 t58 kg
    HC3110P−110 °C4 L · Ø 165 × H 202 mm3 kg · 2,5 kg/24 t72 kg

    The system is built around the sample type: a manifold with 4, 6, 8 or 12 valves and a glass base plate for flasks from 150 to 1,200 mL, an acrylic chamber with a SUS rack and three Ø 25 cm trays for vials, and a stoppering chamber for vacuum sealing. A rotary pump (200 L/min, 1 × 10⁻³ torr), oil mist filter, tube holder, ampoule holder and microplate vacuum box complete the setup.

    Would you like to compare models or discuss your application?

    Describe your sample, volume and throughput and we will respond with proposals for rotor, capacity and cooling, and whether complementary aerosol-tight accessories are relevant.

    Request a quote